For Sale / Wanted

PLEASE do not send any attachments with emails as I will NOT open it,
I therefore can't post your ad and please put WANTED or FOR SALE in the Subject bar. Otherwise I have to guess which it is.

All ads have the date received and will remain on the page for 6 months
at which time if I have not heard from you as to the progress they will be deleted
This enables us to keep the page up to date so all ads should be good

This is a proven winner! This 2007 Duramax was built by Tony Burkhard (Driver of the Dirty Hooker). You may contact Tony with any questions on the build at 989-479-0444 (http://allseasondieselperformance.com/).

Here are some video and photo links for you to view the Power of this Puller. Remember this is a TURN KEY Package!

Contact Scott Wilkinson at 912-739-1744 for questions on purchasing this turn key puller…..

FOR SALE:

1950 Chevrolet
468 BBC 530 HP (See Dyno Sheet), Pete Jackson Gear Drive, Fisher Harmonic Balancer, Schneider Cam, lifters, and valve springs. Holley Carb flows 1035 CFM by Reed Cams, Custom Jet Hot Coated downswept drag headers, Hogged out heads, roller rockers, girdles, and pushrod guides. ZZ572 Chevrolet Tall Valvecovers, Dedenbear electric waterpump, Holley Strip Dominator Intake, High volume oil pump, MSD Billet Distributer and MSD Ignition Box including Coil, Holley Black electric fuel pump,
TH400 Trans w/ Scatter Shield, Blanket, and 8” 4500 RPM Stall Converter, Reverse valve body, larger billet input shaft, Kevlar bands.
Profab Quick Change Transfer Case with Spare Gear Sets
Complete U-Joint scatter shields, billet aluminum milled and numbered Driveline Hoops
1 Ton International Running Gear
Custom cut 31x15.50-15 8 Ply Flotation Tires on 15x14 custom Built Steel Wheels.
Full custom aluminum tin work firewall
Interior is fully done in aluminum Tinwork
Bed floor is aluminum
Straight body, all steel, high gloss paint, hand painted sponsors, Tilt front end, fully removable front end with two people.
Battery Box mounted to full steel fabricated front bumper, class legal drop hitch, motorcycle disk brakes on the front axle.
Underbody is all powdercoated, painted, or undercoated and every part on this truck can be eaten off of. All original glass (no window glass), solid doors, fiberglass race seat.

$19,000 OBO...NO TRADES....Email, call, or text. 541-954-3501

Email for Pictures. kbpalmer@lamar.com

July 15, 2010

FOR SALE:

1995 Chevy 4x4 pulling truck, 498 BBC around 775 HP, Callies crank, Eagle H-beam rods w/L19 bolts, JE pistons, Total seal rings, Merlin “ Grumpy Jenkins” fully ported iron heads, titanium valves, T&D rockers, Comp roller cam, 850 Willy’s Carb, MSD crank trigger, Stahl fender well headers, Dana 60 front, powr lok, 35 spline out axles, 14bolt rear, 400 Turbo, 208 transfer case. 33x12.50x16 Trxus tires Pulls good & smooth, Very competitive and clean truck. Engine has less then 20 hooks on it since new rods, pistons, cam and more. Many high dollar parts . I pull with the Flint Hills Truck Pullers Association in the modified stock class. $21K turn key.

Email or call for more details if interested Pat Ringler 620-279-4218 Emporia, KS.

pjr1957@yahoo.com

Search " patringler" on youtube for more videos
http://www.youtube.com/watch?v=PnlxN0aT_ys

June 30 2010

FOR SALE:

IH 504 cui engine for sale

Riverside cam

pistons cut for big valves

This motor is fresh top to bottom & is out of Silver Sides pulling tractor.

Would make a good Pro motor or even a Mod farm (have a 3100 rpm cam also)

Also have alluminum rims for sale.

call for more info

Steve @ 519-764-2690

May 4 2010

FOR SALE:

Multi Engine Modified Tractor (Blue Express)

5 Chevrolet 350 cu. in. motors, natural aspiration

C frame, can receive different motor combinations

5 speed Fuller transmission

Crower clutch

Roll cage SFI specification, not inspected by NTPA

Firestone Puller 23° tires

Rear and front polished aluminium rims

Many spare parts available

$20,000.00 CDN negociable

Richard Lauzon

Tel : (450) 459-4263 or (450) 459-8017

Email : ent.carriere@rocler.qc.ca

March 29, 2010

FOR SALE:

Mid West aluminum rims 27" wide 18" back spacing 9 bolt $2800 obo

3x3 turbo $800

1-519-764-2690

Steve

March 24 2010

FOR SALE:

1993 INT Bus conversion to haul your puller or race car. DT 360 turbo diesel with intercooler, 5 speed with new clutch. 8 ft beavertail inside with ramp door. Winch included. Seating for up to 12. Air brakes and air ride suspension. Runs great and reliable. Asking $4800 cert OBO. Call Steve 519-843-7151

swhitelaw@vandermareltrucking.ca

Feb 25 2010

FOR SALE:

Modified Tractor Rolling Chassis, 30.5 x 32 rears (cut by Taylors) wedge rails, tractor rear end with outer disc brakes, scs gearbox (3 sets of gears plus whats in the box), banter forward/reverser, Tractor looks good and hooks good, have been running a blown 540 BBC. Looking to take a fiew seasons off due to a young family. Asking $10,500.00 obo canadian funds. Contact Robin at 902-848-6963 0r e-mail mygogreenlawncare@hotmail.com

Feb 25 2010

FOR SALE:

Slightly used RAM clutch kit system #45770 w multi disc iron sintered clutch with extreme duty pressure plate. Fits SB Ford. I bought a Tremec trans and this came with it. I am building a drag car and this clutch wont work for me. It has very little wear on it and costs $2100 new. I am asking $1500 for it OBO. If there are any questions, email me.

ndpuckhead84@cs.com

Nick DeShano

Feb 11 2010

FOR SALE:

1987 Chev Pull Truck
6000lbs Super Stock, Tall Block 496 CI Big Block Chev Motor, Merlin Heads, Belt Driven Cam, Dart Intake Dana
60 Front Corporate Rear, 4.56 Gear, Turbo 400, 205 Case Choice, 31 33 35 Tires. Front Flip Hood
$10,500.00 Ready to Pull

Contact Rob At

dhsalesservice@sympatico.ca

Feb 11 2010

FOR SALE:

I have a special custom heavy duty 53k GVW W900 Kenworth Motorhome/ hauler for sale apropos for big Pull Tractors. Since this is built on a logging chassis it is built for heavy use. It is taller inside than most rigs and has a 94" wide door opening with a 22.5' garage and a 16' bunkhouse. Go to www.nostalgialighting.com/bigbird for pictures and specs. If not interested yourself maybe you know someone looking for a low mileage ( 61K) motorhome/ hauler that is ready for the long haul. The already fair price has been lowered to $145,000 or OBO considering the present market. Call Nick 207-233-3665 EST or E-mail Nostal@maine.rr.com

Feb 9 2010

FOR SALE:

Old 1976 High Roller 4x4 from the Circuit Stock Truck Class. Paint still good.

Chassis only, no motor or trans. Comes with 2 Dana 44 front axles, one is original 1976 and one is an earlier 60's model with enclosed steer axle knuckles. Comes with 2 rear axles, one is Dana 70 with new Detroit Locker still in the box and the other axle under the truck is Dodge?
$2,500.
For infro call Pete 519-826-1538 or e-mail pmilton@uoguelph.ca

Jan 5 2010

FOR SALE:

1998 Chevy 6200lb ProStock 4x4

Built new in 2008

VERY nice truck

Turn Key

Please serious inquires ONLY!

$40,000

Click this Link for Several Photos
http://kbphotography2007.webs.com/prostockpullingtruck.htm

Call Jamie for Details 270-547-0325
Guston, Kentucky

Dec 12 2009

FOR SALE:

I have a SCS 12.66 drop 4X4 Quick Change Transfer Case.

It was bought new in 99. Never been used $2200 US.

1 M-W Quick Change Coupler $96 US.

1 M-W C4 Trans Coupler $145 US.

2 1-3/4 10 spline 1350 End Yokes $500.

These parts are all new never used.

Kevin @ 519-728-3357

Belle River, ON

Make an Offer

Dec 5 2009

FOR SALE:

SRP scatter blanket 84" long off 1466 $300

Scheid turbo 3x3 110 exhaust grt for smaller cube $1000

cam shaft 3-3500 rpm $150

Ford 5000 axle $400

517 AC sleeves new $300

706 frt support $300

1-519-764-2690

ask for steve

Dec 5 2009

FOR SALE:

1987 Chev Pull Truck
6000lbs Super Stock, Tall Block 496 CI Big Block Chev Motor, Merlin Heads, Belt Driven Cam, Dart Intake Dana
60 Front Corporate Rear, 4.56 Gear, Turbo 400, 205 Case Choice, 31 33 35 Tires.
$14,000.00 Ready to Pull

Contact Rob At

dhsalesservice@sympatico.ca

Nov 30 2009